partial replacement of sand with marble powde

  • Home
  • /
  • PRODUCT
  • /partial replacement of sand with marble powde

Marble Powder As A Partial Replacement Of Sand - 1454 ...

Marble Powder As A Partial Replacement Of Sand. V. CONCLUSION From the test results it is clearly evident that granite powder as a partial replacement of sand proves to be beneficial when Durability properties of Concrete is considered. Durability of Concrete using Granite Fines is almost same as that of reference mix (GF0), However at 30% ...

Partial replacement of sand with marble waste and scoria ...

2020-11-2 · At 100% combined replacement rate of sand with marble waste and scoria there is a significant reduction of a slump by 60% (30 mm) due to the significant increment of water demand at the full replacement of sand with marble waste and scoria This argument also revealed by Moreover, to easily understand the difference, the result is shown ...

Use of Waste Marble Powder as Partial Replacement in ...

2019-7-1 · using waste marble powder as partial replacement of cement and sand. Keywords: Waste marble powder, concrete, compressive strength, flexure strength, split-tensile strength, workability, durability. I. INTRODUCTION. Marble is obtained from the transformation of pure limestone. The purity of marble depends upon the colour of the marble.

Use of Waste Marble Powder as Partial Replacement in ...

2015-5-18 · But the split tensile strength decreased for the mix which contains 20 % marble powder dust against cement (10%) and sand (10%) by 11%. Hence result shows that marble powder when mixed with sand and cement together has low split strength as compared to the replacement of marble waste in cement and sand individually. 3.3 Durability.

Partial replacement of sand with marble waste and scoria ...

Request PDF | Partial replacement of sand with marble waste and scoria for normal strength concrete production | Sand is used more than any other natural resources except water and air, However ...

Partial Replacement of Cement with Marble Dust Powder

Partial Replacement of Cement with Marble Dust Powder. : In this project we have made fly ash cement bricks with variations in its percentage of composition. The project describes the use of local fly ash in construction industry in a way to minimize the industrial waste. The aim of this project is to find that percentage of composition by ...

Feasibility of waste marble powder in concrete as partial ...

2018-1-1 · The compressive strength of concrete containing 0%, 20% and 30% marble powder as partial substitution of sand and cement amalgam at 7, 28, 56 and 90 days curing ages was obtained. Fig. 4 depicts the effects of marble powder as partial replacement of cement and sand amalgam. It can be observed that, at all replacement levels of sand and cement ...

Effect of Marble Powder and Quarry Dust as Partial ...

2019-11-22 · Effect of Marble Powder and Quarry Dust as Partial Replacement for Fine Aggregate on Concrete. Dr. M. Kannan. Sandhya. Swarnalakshmi. HOD of CIVIL-PITS Dept of CIVIL-PITS Dept of CIVIL-PITS. Abstract:- Construction industry is one of the major users of the natural resources like sand, rocks, clay and other soils.

(PDF) "Partial Replacement of Cement with Marble Dust

In order to evaluate the effects of the marble powder on mechanical behaviour, many different mortar mixtures were tested, all prepared with sand to cement ratio of 3:1 at

Combined use of Stone Dust as Partial Replacement of

2016-10-15 · The Glass Powder is used as 20% replacement of the cement and Stone Dust as the partial replacement of Fine Aggregate from 0%, 10%, 20%, 30% and 40%. The grade of the concrete here is M25 and M30 grade. Slump Test was carried out for the fresh concrete whereas Compressive Strength, Flexure Strength and Split Tensile Tests were carried for the ...

Experimental Study on Partial replacement of sand with ...

2018-8-2 · to partial replacement of the fine aggregate with marble powder. M25 of concrete mix has been taken and casted into cubes and astrength tests have been conducted. In this paper I conduct an experiment on partial replacement of sand with marble dust powder at different % of mdp which are 20,25,30,35,40%.

Marble Powder As A Partial Replacement Of Sand - 1454 ...

Marble Powder As A Partial Replacement Of Sand. V. CONCLUSION From the test results it is clearly evident that granite powder as a partial replacement of sand proves to be beneficial when Durability properties of Concrete is considered. Durability of Concrete using Granite Fines is almost same as that of reference mix (GF0), However at 30% ...

PARTIAL REPLACEMENT OF FINE AGGREGATE BY

2019-12-30 · c) Partial replacement of fine aggregate with marble powder in a concrete mix boosts the compressive strength of con-crete. d) Test also indicates that the waste marble powder can be successively utilized as partial replacement of fine aggre-gate in concrete production. e) As marble powder easily contaminates air and water and

IJERT-Use of Waste Marble Powder as Partial Replacement

Different mixes was testing was also conducted by using a 100kN capacity prepared by using a different percentage of marble powder electrically operated flexural testing machine at a (0%, 10%, 10% and 20%) namely MX0, MX1, MX2& MX3 displacement rate of 0.05 mm/sec. Water absorption test was as a partial replacement in the cement sand mix, where ...

Partial Replacement of Cement with Marble Powder And ...

2020-8-10 · 4. Using marble powder and silica fume up to 20% as an additive materials enhancement the compressive strength up to 31.85%. 5. Based on the experiment result it showed that replacement of cement and sand by marble powder and silica fume we can replace up to the 20% of cement replacement. References

Partial Substitution of Sand and Cement with Waste

2018-10-31 · Abstract. This paper introduces the study on self-compacting concrete (SCC) using waste marble powder (WMP) as a partial substitution of sand along with waste limestone dust (WLSD) as a partial substitution for cement in addition to sugarcane molasses as an admixture.

Feasibility of waste marble powder in concrete as partial ...

2018-1-1 · The compressive strength of concrete containing 0%, 20% and 30% marble powder as partial substitution of sand and cement amalgam at 7, 28, 56 and 90 days curing ages was obtained. Fig. 4 depicts the effects of marble powder as partial replacement of cement and sand amalgam. It can be observed that, at all replacement levels of sand and cement ...

Review Paper On “Effective Partial Replacement Of

2016-10-18 · in marble powder as replacement of cement as compared to normal concrete. But when they replaced sand with marble powder a consider increment in compressive strength was found at an optimum percentage of 20%. 4. Prof. Veena G. Pathan, Prof. Md. Gulfam Pathan , “Feasibility and need of use of Waste marble powder in

A Study on Partial Replacement of Cement with

2016-12-27 · The optimum percentage for replacement of cement with Metakaolin and Marble powder was 9% and 10%. Vijay Shankar, Suji Studied the properties of HPC which were determined by using Metakaolin as partial cement replacement and Quarry dust

Optimization of Granite Powder used as Partial

2019-7-1 · Partial replacement of cement and usual fine aggregates with varying percentage of marble powder (0%, 5%, 10%, 15%, and 20%) and marble granules revealed that increased Waste Marble Powder (WMP) or Waste Marble Granule (WMG) resulted in increase in workability and compressive strength of mortar concrete [8].

Experimental Study on Partial replacement of sand with ...

2018-8-2 · to partial replacement of the fine aggregate with marble powder. M25 of concrete mix has been taken and casted into cubes and astrength tests have been conducted. In this paper I conduct an experiment on partial replacement of sand with marble dust powder at different % of mdp which are 20,25,30,35,40%.

IJERT-Use of Waste Marble Powder as Partial Replacement

Different mixes was testing was also conducted by using a 100kN capacity prepared by using a different percentage of marble powder electrically operated flexural testing machine at a (0%, 10%, 10% and 20%) namely MX0, MX1, MX2& MX3 displacement rate of 0.05 mm/sec. Water absorption test was as a partial replacement in the cement sand mix, where ...

PARTIAL REPLACEMENT OF FINE AGGREGATE BY

2019-12-30 · c) Partial replacement of fine aggregate with marble powder in a concrete mix boosts the compressive strength of con-crete. d) Test also indicates that the waste marble powder can be successively utilized as partial replacement of fine aggre-gate in concrete production. e) As marble powder easily contaminates air and water and

Partial Replacement of Cement with Marble Powder And ...

2020-8-10 · 4. Using marble powder and silica fume up to 20% as an additive materials enhancement the compressive strength up to 31.85%. 5. Based on the experiment result it showed that replacement of cement and sand by marble powder and silica fume we can replace up to the 20% of cement replacement. References

Partial Substitution of Sand and Cement with Waste

2018-10-31 · Abstract. This paper introduces the study on self-compacting concrete (SCC) using waste marble powder (WMP) as a partial substitution of sand along with waste limestone dust (WLSD) as a partial substitution for cement in addition to sugarcane molasses as an admixture.

Partial Replacement of Fine Aggregates with Quarry Dust ...

2018-6-15 · river sand. Quarry dust and Marble powder contains similar properties as that of river sand and hence accepted as a building material. The present paper focuses on investigating maximum percentage replacement of river sand by Quarry dust and Marble powder in varying equal percentages 0%, 10%, 20%, 30%, 40%, 50%, and 60% for M25 mix designations.

A Study on Partial Replacement of Cement with

2016-12-27 · The optimum percentage for replacement of cement with Metakaolin and Marble powder was 9% and 10%. Vijay Shankar, Suji Studied the properties of HPC which were determined by using Metakaolin as partial cement replacement and Quarry dust

Study on Marble Powder as Partial Replacement of

2020-12-19 · study initiated to arrive at the feasibility and suitability of using marble powder as a partial replacement material by 0, 5, 10, 15, 20 and 25% weight of cement in M30 grade concrete. Experimentation performed and the conclusions are derived as presented

Research Paper PARTIAL REPLACEMENT OF CEMENT

2012-5-16 · increased with addition of waste marble powder up to 10% replace by weight of cement and further any addition of waste marble powder the Split Tensile strength decreases. • Thus we found out the optimum percentage for replacement of marble powder with cement and it is almost 10% cement for both cubes and cylinders.

An Experimental investigation on utilizations of Marble ...

2021-10-7 · 3.2 COMPRESSIVE STRENGTH - Compressive strength of concrete mixes with various percentage of marble dust as replacement of cement at age of 7 days and 28 days respectively are shown in Fig.3 and Fig.4. From Table 10 and 11 it can be